XDA developer, Unjustified Dev has developed a handy root tool that works on a range of LG devices, providing root access on Android Lollipop firmware .
Compatible LG devices
- LG F60 [All variants]
- LG Tribute [All variants]
- LG G2 [All variants]
- LG MS [395/D393]
- LG G3 [Lollipop running all models except Verizon version]
- LG G Flex 2
- LG G Pro 2
- LG L90 [All variants except Verizon model]
- LG Transpyre
- LG Volt [LS740]
If you are an owner of any of the aforementioned LG devices then you can take advantage of the root tool by Unjustified Dev. Check out below for a step-by-step root guide.
Important points
Create a backup of all important data of the phone.
Ensure that the LG device is having above 80% battery.
Rooting your device will void the device of its manufacturer's warranty.
The LG Root tool supports the aforementioned LG smartphones only. Do not apply this on any other variant.
We will not be held liable for any damage to the device.
Ensure that the LG device is having above 80% battery.
Rooting your device will void the device of its manufacturer's warranty.
The LG Root tool supports the aforementioned LG smartphones only. Do not apply this on any other variant.
We will not be held liable for any damage to the device.
Pre-requisites
Download LG Root
Download LG Drivers
Micro USB cable to connect with PC
Your LG device should be encrypted
Download LG Drivers
Micro USB cable to connect with PC
Your LG device should be encrypted
How to root LG G3, G Flex 2, LG G2 and G Pro 2 on Android 5.0 Lollipop
Step-1: Extract the LG_Root.zip in a preferred location on your PC
Step-2: Enable USB debugging. Go to Settings>> About phone>> Software Information and tap build number until you are presented with a message that reads, You are now a developer. Exit back to Settings main screen. Now enable USB Debugging under Developer Options
Step-3: Connect your LG phone to the computer via USB cable
Step-4: Launch a command prompt in an empty space inside the LG Root folder. Press Shift + Right click on the keyboard and select Open command prompt here option
Step-5: When the command window launches, issue the following command to ensure your LG phone is recognised properly
Step-6: Now execute the following command
adb.exe push busybox /data/local/tmp/ &&
adb.exe push lg_root.sh /data/local/tmp && adb.exe push UPDATE-SuperSU-v2.46.zip /data/local/tmp
Step-7: The necessary files should now be on your phone. At this point disconnect the phone from PC and enter download mode.
Turn off the device first
Hold Volume Up and connect the USB cable
Wait for a few seconds and until drivers are installed
Hold Volume Up and connect the USB cable
Wait for a few seconds and until drivers are installed
Step-8: Now find out which COM port your device is connected to. Double click ports.bat file in the LG Root folder. Note down the COM port number
Step-9: Execute the following command
LG Root
LG Root
Step-10: To run the root script, type in the command below
sh /data/local/tmp/lg_root.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip /data/local/tmp/busybox
Your screen should be like this
Step-11: Pull out the battery to get the device out of download mode
That's it, you are done. Re-insert the battery and turn your device on.
No comments:
Post a Comment